DPM-Sensors with LED
DPM-110 Sensor Selection
DPM-110 PRODUCT SPECIFICATIONS
Pressure Range
* 10 Pa up to 7500 Pa
* Linear Pressure Display in Pa
* Adjustable to kPa - mBar
* Range adjustable +/- 50% of range
Air Volume Range
* Linear volume Display selectable via Keyboard
* m/s - m3/s - m3/h - l/s - ACR (Air Change Rate)
* Small value display shut off function at no flow
Signal Output
* 0...10V and 4..20mA
* Output programmable i.e 1..5V - 5..19mA
* PID control output programmable
* Pressure or Velocity output
Alarm Output
* 2 Relay Volt free change over contacts 24dc/ac non inductive
*1 Digital Input for mute alarm or door contact
. 1 Analogue Input for set point or feed back of actuator
Linearity 0.25% of Full Scale => 100 Pa and 0.25 Pa <100 Pa
Overload protection programmable on/off
Power Supply 24Vac/dc (100mA) non isolated
Power Supply 24Vac isolated
Repeatability 0.1% of Full Scale
Temperature drift 0% with auto zero selected 'on'
Temperature drift 0.05%K(+10C to 50C) with auto zero selected 'off'
Enclosure Plastic IP44
Tube connection 4mm barbed or 6mm barbed
Two Modbus rtu communication ports standard
Remote Display connects to Modbus port 2 including power supply
Terminal connections on rear
Calibration mode adjustment
DPM-120-Sensor Selection
PRODUCT SPECIFICATIONS
* DPM-120 Panel Sensor Pressure - Volume Transmitter
* Seven Segment LED display
* Operator Keyboard with alarm indicators amber-amber
* Ranges from 10 Pa up to 7500 Pa
* Linear Pressure Display in Pa standard.
* Adjustable to kPa - mBar
* Range adjustable +/- 50% of range via keyboard
* Linear volume Display selectable via Keyboard.
* m/s - m3/s - m3/h - l/s - ACR (Air Change Rate)
* Small value display shut off function at no flow.
* Signal Output : 0...10V and 4..20mA
* Output Keyboard programmable i.e 1..5V - 5..19mA
* PID control loop output on selectable terminal
* Pressure or Velocity output on selectable terminal
* Calibration mode adjustment
* 2 Calibration valves
* Adjustable alarm threshold indicated by red-amber-green LED
* 2 Relay Volt free change over contacts 24dc/ac non inductive
* 1 Digital Input for mute alarm or door contact.
* 1 Analogue Input for set point or feed back of actuator.
* Linearity 0.25% of Full Scale => 100 Pa and 0.25 Pa <100 Pa
* Overload protection programmable on/off
* Power Supply 24Vac/dc (100mA) non isolated
* Power Supply 24Vac isolated
* Repeatability 0.1% of Full Scale
* Temperature drift 0% with auto zero selected 'on'
* Temperature drift 0.05%K(+10C to 50C) with auto zero selected 'off'
* Enclosure Plastic IP44
* Tube connection 4mm barbed or 6mm barbed
* Two Modbus rtu communication ports standard
* Remote Display connects to Modbus port 2 inclding power supply
* Terminal connections on rear
* UKAS traceable Calibration Certificate is standard
DPM-210-Sensor-Selection
PRODUCT SPECIFICATIONS
* DPM-120 Panel Sensor Pressure - Volume Transmitter
* Seven Segment LED display
* Operator Keyboard with alarm indicators amber-amber
* Ranges from 10 Pa up to 7500 Pa
* Linear Pressure Display in Pa standard.
* Adjustable to kPa - mBar
* Range adjustable +/- 50% of range via keyboard
* Linear volume Display selectable via Keyboard.
* m/s - m3/s - m3/h - l/s - ACR (Air Change Rate)
* Small value display shut off function at no flow.
* Signal Output : 0...10V and 4..20mA
* Output Keyboard programmable i.e 1..5V - 5..19mA
* PID control loop output on selectable terminal
* Pressure or Velocity output on selectable terminal
* Calibration mode adjustment
* 2 Triacs for Tri Control of actuator 24ac.
* Adjustable alarm threshold indicated by red-amber-green LED
* 2 Relay Volt free change over contacts 24dc/ac non inductive
* 1 Digital Input for mute alarm or door contact.
* 1 Analogue Input for set point or feed back of actuator.
* Linearity 0.25% of Full Scale => 100 Pa and 0.25 Pa <100 Pa
* Overload protection programmable on/off
* Power Supply 24Vac/dc (100mA) non isolated
* Power Supply 24Vac isolated
* Repeatability 0.1% of Full Scale
* Temperature drift 0% with auto zero selected 'on'
* Temperature drift 0.05%K(+10C to 50C) with auto zero selected 'off'
* Enclosure Plastic IP44
* Tube connection 4mm barbed or 6mm barbed
* Two Modbus rtu communication ports standard
* Remote Display connects to Modbus port 2 inclding power supply
* Terminal connections on rear
* UKAS traceable Calibration Certificate is standard