V-Sensors with LED
V-Sensor LED Selection
PRODUCT SPECIFICATIONS
* V-Sensor Pressure - Volume Transmitter
* Seven segment LED display with adjustable back light
* Operator Keyboard with alarm indicators red-green
* Ranges from 10 Pa up to 7500 Pa
* Linear Pressure Display in Pa standard.
* Adjustable to kPa - mBar
* Range adjustable +/- 50% of range via keyboard
* Linear volume Display selectable via Keyboard.
* m/s - m3/s - m3/h - l/s - ACR (Air Change Rate)
* Small value display shut off function at no flow.
* Signal Output : 0...10V and 4..20mA
* Output Keyboard programmable i.e 1..5V - 5..19mA
* PID control loop output on selectable terminal
* Pressure or Velocity output on selectable terminal
* Calibration mode adjustment
* Adjustable alarm threshold indicated by red-green LED
* 1 Relay Volt free change over contact 24dc/ac non inductive
* Linearity 0.25% of Full Scale => 100 Pa and 0.25 Pa <100 Pa
* Overload protection programmable on/off
* Power Supply 24Vac (130mA) isolated
* Power Supply 24Vac or 110Vac or 230Vac isolated optional
* Repeatability 0.1% of Full Scale
* Temperature drift 0% with auto zero selected 'on'
* Temperature drift 0.05%K(+10C to 50C) with auto zero selected 'off'
* Enclosure Plastic ABS IP65
* Tube connection 6mm barbed or 4mm barbed
* Two Modbus rtu communication ports standard
* Remote Display connects to Modbus port 2 inclding power supply
* Two cable glands M20 and M16 standard
* UKAS traceable Calibration Certificate is standard