MDF Multipoint Flow Probe data sheet ... (PDF)

CMR is the manufacturer and designer of the MDF Multipoint Duct Flowprobes. All Multipoint Duct Flowprobes are normally made for stock in standard sizes to fit round spiral ducting having one mounting bracket on one side only. Double sided Probes are available up to 1000m. They can be made to measure to suit any type of application on request. They are constructed of alluminium extrusions and are also suitable for smaller ducts or attenuators. The Multipoint Duct Flowprobes are easily installed in new or retro-fit installations by simply cutting a 25.4mm (1") round hole into the duct and the mounting bracket is fitted with a gasket to seal the probes into round, oval or flat ducts. They can be mounted as a cross into round ducts and CMR provides a manifold for easy installation and averaging. When mounted into the air stream they provide an excellent differential velocity pressure. The duct flow probes can be epoxy coated as an optional.

L= 75mm

L= 95mm

L= 120mm

L= 135mm

L= 145mm

L= 155mm

L= 175mm

L= 195mm

L= 220mm

L= 245mm

L= 275mm

L= 310mm

L= 345mm

L= 395mm

L= 445mm

L= 495mm