The P-Sensors are high precision differential low air pressure, volume transmitters and PID controllers.They are for use in laboratory, clean room installations containment facilities and commercial and industrial ventilation systems.They have overload protection and auto-zero. The Transmitters have a linear output to pressure or air volume. They work with all CMR duct mounted Veloprobes, Flowprobes, Flowgrids and Venturis. One red and one green led can indicate high or low alarm on the keypad front panel. Signal outputs of 0..10V and 4..20mA as well as modbus rtu is fitted for connection to the BMS, SCADA or PLC's. Power supplies 24Vdc, 24Vac, 110Vac or 230Vac is available. CE conformity certificates, as well as calibration certificates traceable to International Standards are supplied as standard. All commissioning configurations can be done via the standard operator's keyboard.
The V-Sensors are high precision differential low air pressure and volume transmitters, PID controllers and have one volt free change over alarm relay and a buzzer on board. They are for use in laboratory, clean room installations containment facilities and commercial and industrial ventilation systems.They have overload protection and auto-zero. The Transmitters have a linear output to pressure or air volume. They work with all CMR duct mounted Veloprobes, Flowprobes, Flowgrids and Venturis. One red and one green led can indicate high or low alarm on the keypad front panel. Signal outputs of 0..10V and 4..20mA as well as modbus rtu is fitted for connection to the BMS, SCADA or PLC's. There is an additional modbus rtu connection to operate a variety of remote alarm display panels. Power supplies 24Vdc, 24Vac, 110Vac and 230Vac are available. CE conformity certificates, as well as calibration certificates traceable to International Standards are supplied as standard. All commissioning configurations can be done via the standard operator's keyboard.
The DPM panel mount sensors are high precision differential low air pressure, volume transmitters and PID controllers. They have two volt free change over alarm relays and a buzzer. They are for use in laboratory, clean room installations containment facilities and commercial and industrial ventilation systems. They have overload protection and auto-zero. The Transmitters have a linear output to pressure or air volume. They work with all CMR duct mounted Veloprobes, Flowprobes, Flowgrids and Venturis. Two amber leds can indicate high or low alarm on the keypad front panel. Signal outputs of 0..10V and 4..20mA as well as modbus rtu are standard for connection to the BMS, SCADA or PLC's. There is an additional modbus rtu connection to operate a variety of remote alarm display panels. Power supplies 24Vdc and 24Vac is available. CE conformity certificates, as well as calibration certificates traceable to International Standards are supplied as standard. All commissioning configurations can be done via the standard operator's keyboard.
This website uses essential cookies to provide a stabile operation, saving your IP in an anonymised form with the date and settings, take and fulfill enquiries - quotations and orders and only disclose information to third-parties for goods delivery purposes and payment transactions. This site does not normally use 'Analytical' or 'Marketing' cookies to function and therefore they are not necessary and shall not enhance the functions. However, they can be selected independently.
ON LINE SHOP
